| |
|
Manual -
PN 120 |
|
 |
Band saw snitable for small workshops and
assemblies. Feed of blade is manual. Clamped material can be cut under
angles 0° to + 60°. |
| |
|
|
Gravitational
-
PN 155 |
|
 |
Band saw snitable for small workshops and
assemblies. The saw is equipped with hydraulic control of feed of
blade. Clamped material can be cut under angles 0° to + 60°. |
| |
|
|
Gravitational -
PN 160 |
|
 |
Band saw can be used for piece production and series
production.
The saw is equipped with hydraulic control
of feed of blade and with quick-acting vice for cutting material.
Clamped material can be cut under angles 0° to
±
60°. |
| |
|
Semi-automatic machine
PNS 160
Special |
|
 |
Band saw can be used for piece production and series
production. Horizontal feed of blade is led lineary on the pillar.
The saw is equipped with hydraulic control
of feed of blade and with automatic lift of arm by hydraulic pump and
with quick-acting vice for cutting material. Clamped material can be
cut under angles 0° to
±
60°. |
| |
|
|
Gravitational
-
PN 220
Klasik |
|
 |
Band saw can be used for piece production and series
production.
The saw is equipped with hydraulic control
of feed of blade and with quick-acting vice for cutting material.
Clamped material can be cut under angles
-60° to
±45°. |
| |
|
Semi-automatic machine
PN 220 Hydraulik |
|
 |
Band saw can be used for piece production and series
production.
The saw is equipped with hydraulic control
of feed of blade and with automatic lift of arm by hydraulic pump and
with quick-acting vice for cutting material. Clamped material can be cut under angles
-60° to
±45°. |
| |
|
Semi-automatic machine
PNS 230
Special |
|
 |
Band saw can be used for piece production and series production.
Horizontal feed of blade is led lineary on the pillar.
The saw is equipped with hydraulic control
of feed of blade and with automatic lift of arm by hydraulic pump and
with quick-acting vice for cutting material. Clamped material can be cut under angles
-60° to
±45°. |
| |
|
